mono-mix - small but powerful!
The mono-mix is a compact and easy to operate mixing pump best suited for the processing of all machine-mixable interior and exterior plasters, as well as for adhesives ad reinforcing mortar. The mono-mix can be used both with bagged material as well as paste materials. The pump has 4 convenient output settings, enabling it to be adjusted to the relevant material. An optional agitator is available for materials that are difficult to mix.
Its reliability, powerful motor and tried-and-tested m-tec detail solutions have made this small, powerful mixing pump a long-runner for years! The mono-mix is available in two versions: with 230 volts or 400 volts. The 230 volt version ensures a frequency converter of quick power delivery at any time: a great benefit on construction sites with 230V supply, e.g. for renovations or inside.
mono-mix - added benefits
Easy Work
The powerful drive technology of the mono-mix ensures there is always enough power for challenging tasks, even in the 230 volt version.
Easy Use
Together, clearly structured controls, 3-way dismantling, easy transport by crane and large wheels make the mono-mix easy to handle.
Easy Clean
The simple but logical structure enables the mono-mix to be cleaned quickly.
The transparent layout of the controls and the conscious avoidance of superfluous switches make for simple operation.
The large wheels make for easy transportation at all times. In addition, the mono-mix can be dismantled into 3 trouble-free components on the construction site in just a few steps.
As is typical of all m-tec systems, the mono-mix has easy and quick to use tension wedges, enabling important elements such as the worm pump or mixer motor to be replaced in just a few seconds.
mono-mix - facts
Areas of application and use
All pumpable dry mortar such as:
- Gypsum plaster
- Lime gypsum plaster
- Cement plaster
- Lime plaster
- Lime-cement plaster
- Insulating plaster/render
- Finishing plaster
- Restoration plaster
- Reinforcing and adhesive mortar
- Flowing screed
- Levelling compounds
Technical information
| mono-mix FU | mono-mix | |
| Standard delivery volume: | approx. 5 - 20 l/min, variable with other worm pumps | approx. 22 l/min, variable with other worm pumps |
| Conveying distance: | up to 20 m* | up to 20 m* |
| Conveying height: | up to 20 m* | up to 20 m* |
| Conveying pressure: | up to 20 bar | up to 40 bar |
| Drive motor: | 3.0 kW | 5.5 kW |
| Compressed air supply: | 0.9 kW, approx. 250 l/min, 4 bar | 1.1 kW, approx. 250 l/min, 4 bar |
| Electrical connection: | 230 V, 1 ph | 400 V, 50 Hz, 3 ph |
| Fuse: | 16 A | 25 A |
| Connecting cable: | 3 x 2.5 mm² | 5 x 2.5 mm² |
| Connector: | 16 A, 3 P, 6 h | 16 A, 5 P, 6 h |
| Water supply: | 3/4" water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running | |
| Dimensions: | approx. 1430 x 670 x 1150 mm | |
| Weight: | 160 kg | 165 kg |
*Dependent on consistency, quality and composition of the material, pump model and condition, diameter and length of the delivery hose as well as the pumping height of the material.